Dell PowerConnect Brocade 300 Fabric OS Administrator's Guide v7.1.0 - Page 610

24 Displaying the range of output ports connected to xlate domains 1. Log in to a switch in the edge fabric. 2. Enter the lsDbShow command on the edge fabric. In the lsDbShow output, ports in the range from 129 through 255 are the output ports on the front domain. The following example shows the range of output ports. linkCnt = 2, flags = 0x0 LinkId = 53, out port = 1, rem port = 35, cost = 500, costCnt = 0, type = 1 LinkId = 57, out port = 129, rem port = 18, cost = 500, costCnt = 0, type = 1 The following example also shows the use of the lsDbShow display on the edge fabric. The front domain, domain 3, has two links representing two EX_Port connections with output ports 129 and 132. Domain = 3, Link State Database Entry pointer = 0x100bbcc0 ......... linkCnt = 4, flags = 0x0 LinkId = 199, out port = 129, rem port = 2, cost = 10000, costCnt = 0, type = 1 LinkId = 199, out port = 132, rem port = 3, cost = 10000, costCnt = 0, type = 1 LinkId = 2, out port = 1, rem port = 2, cost = 10000, costCnt = 0, type = 1 LinkId = 1, out port = 32, rem port = 2, cost = 10000, costCnt = 0, type = 1 610 Fabric OS Administrator's Guide 53-1002745-02