Dell PowerConnect W-AP175 Dell PowerConnect W-AP175P Installation Guide - Page 28

Product Specifications Mechanical  Dimensions (H x W x D)  10.2 inches x 9.4 inches x 4.1 inches  26 cm x 24 cm x 10.5 cm  Weight: 7 lbs/3.25 kg  Shipping Dimensions (H x W x D)  12.9 inches x 12.6 inches x 11.8 inches  33 cm x 32 cm x 30 cm  Shipping Weight: 16.6 lbs/7.5 kg  Temperature  Operating (W-AP175P): -30ºC to 60ºC (-22ºF to 140ºF)  Operating (W-AP175AC/DC): -40ºC to 55ºC (-40ºF to 131ºF)  Storage: -40ºC to 70ºC (-40ºF to 158ºF)  Relative Humidity: 5% to 95% non-condensing  Altitude: Up to 9,850ft (3,000 meters)  Mounting: wall or pole mountable  Antennas:  Quad, N-type female interfaces (2 x 2.4 GHz, 2 x 5GHz) for external antenna support (supports MIMO)  Feeder cable may be used for external antenna deployments  Visual Status Indicators (LEDs): See Table 2 Electrical Power In  W-AP175P: 48-volt DC 802.3at power over Ethernet (PoE+)  W-AP175AC: 100-240 volt AC from external AC power source  W-AP175DC: 12-48 volt DC from external DC power source  Maximum power consumption: 18 watts (excludes power consumed by any POE device connected to and powered by the W-AP175AC or W-AP175DC) Power Out  The AC and DC powered models provide an 802.3af POE power source (PSE) on the ethernet interface. Interfaces  Network:  1 x 10/100/1000BASE-T Ethernet (RJ-45), auto-sensing link speed and MDI/MDX  Power:  1 x DC power connector (in W-AP175DC model only)  1 x AC power connector (in W-AP175AC model only)  Antenna:  4 x N-Type female antenna interfaces 28 Dell PowerConnect W-AP175 Outdoor Access Point | Installation Guide