Dell PowerEdge T320 Owner's Manual - Page 153
>. Check PSU
View all Dell PowerEdge T320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Error Code Message Information Action Remove and re-seat the failed disk. If the issue persists, see Getting Help. PDR1016 Message Drive is removed from disk drive bay . LCD Message Drive removed from disk drive bay . Check drive. Details The controller detected that the drive was removed. Action Verify drive installation. Re-seat the failed drive. If the issue persists, see Getting Help. PST0128 Message LCD Message Details Action No memory is detected. No memory is detected. Inspect memory devices. System BIOS was unable to detect memory in the system. Re-seat the memory modules. If the issue persists, see Getting Help. PST0129 Message Memory is detected, but is not configurable. LCD Message Memory is detected, but is not configurable. Check memory devices. Details System BIOS detected memory, but was unable to configure the memory for system operation. Action Compare system memory installation to supported system memory configurations. PSU0001 Message LCD Message Action Power supply failed. PSU failed. Check PSU. Remove and reinstall the power supply. If the issue persists, see Getting Help. PSU0002 Message A predictive failure detected on power supply . LCD Message Predictive failure on PSU . Check PSU. Details System performance and power redundancy may be degraded or lost. Action Remove and reinstall the power supply at the next service window. If the issue persists, see Getting Help. PSU0003 Message The power input for power supply is lost. LCD Message Power input for PSU is lost. Check PSU cables. Details The power supply is installed correctly but an input source is not connected or is not functional. Action Verify the input source is attached to the power supply. Verify the input power is within the operating requirements for the power supply. PSU0006 Message Power supply type mismatch. 153