Dell PowerEdge T320 Owner's Manual - Page 32
System Profile Settings Screen, System Security Screen, DAPC is Dell Active Power Controller.
View all Dell PowerEdge T320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
System Profile Settings Screen Menu Item System Profile Description Allows you to set the system profile. If you set the System Profile option to a mode other than Custom, the BIOS automatically sets the rest of the options. You can only change the rest of the options if the mode is set to Custom. By default, the System Profile option is set to Performance Per Watt Optimized (DAPC). DAPC is Dell Active Power Controller. NOTE: The following parameters are available only when the System Profile is set to Custom. CPU Power Management Allows you to set the CPU power management. By default, the CPU Power Management option is set to System DBPM (DAPC). DBPM is Demand-Based Power Management. Memory Frequency Allows you to set the memory frequency. By default, the Memory Frequency option is set to Maximum Performance. Turbo Boost Allows you to enable or disable the processor to operate in turbo boost mode. By default, the Turbo Boost option is set to Enabled. C1E Allows you to enable or disable the processor to switch to a minimum performance state when it is idle. By default, the C1E option is set to Enabled. C States Allows you to enable or disable the processor to operate in all available power states. By default, the C States option is set to Enabled. NOTE: When C States is enabled, the Monior/Mwait sub-option must also be enabled. . Monitor/Mwait Allows you to enable Monior/Mwaitinstructions in the processor. By default, the Monior/Mwait option is set to Enabled for all system profiles except Custom. NOTE: Disable this option if you disable the C States option in the Custom mode. NOTE: When C States is enabled in Custom mode, changing the Monior/Mwait setting does not impact system power or performance. Memory Patrol Scrub Allows you to set the memory patrol scrub frequency. By default, the Memory Patrol Scrub option is set to Standard. Memory Refresh Rate Allows you to set the memory refresh rate. By default, the Memory Refresh Rate option is set to 1x. Memory Operating Allows you to set the DIMM voltage selection. When set to Auto, the system automatically sets Voltage the system voltage to the optimal setting based on the DIMM capacity and the numbers of DIMMs installed. By default, the Memory Operating Voltage option is set to Auto. System Security Screen Menu Item Intel AES-NI Description The Intel AES-NI option improves the speed of applications by performing encryption and decryption using the Advanced Encryption Standard Instruction Set and is set to Enabled by default. 32