Dell PowerEdge T320 Owner's Manual - Page 157
Failure detected on Internal Dual SD Module <, Internal Dual SD Module <
View all Dell PowerEdge T320 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 157 highlights
Error Code Message Information Action Reinstall the SD module. RFM2004 Message LCD Message Details Action Failure detected on Internal Dual SD Module . Internal Dual SD Module failed. Check SD Card. The SD card module is installed but improperly configured or failed to initialize. Reinstall the SD module and remove and reinstall SD cards. RFM2006 Message Details Action Internal Dual SD Module is write protected. The module is write-protected. Changes may not be written to the media. If unintended, remove the media and disable write protection. SEC0031 Message The chassis is open while the power is on. LCD Message Intrusion detected. Check chassis cover. Details The chassis is open. System performance may be degraded, and security may be compromised. Action Close the chassis. Check system logs. SEC0033 Message The chassis is open while the power is off. LCD Message Intrusion detected. Check chassis cover. Details The chassis was opened while the power was off. System security may have been compromised. Action Close the chassis and verify hardware inventory. Check system logs. SEL0006 Message Details Action All event logging is disabled. This message is displayed when all event logging has been disabled by the user. If unintended, re-enable logging. SEL0008 Message Log is full. Details When the event log is full, additional events are not written to the log. Older events may be overwritten and lost. This message may also appear if the user disabled event logging. Action Backup and clear log. SEL0012 Message Could not create or initialize the system event log. Details If the system event log fails to initialize, platform status and failure events are not captured. Some management software do not report platform exceptions. Action Reboot the management controller or iDRAC. Cycle system input power. If problem persists call support. 157