Dell XPS 630i Service Manual - Page 26
Ensure that you install a single memory module in DIMM connector 1, - processor upgrade
View all Dell XPS 630i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
NOTICE: Do not install ECC memory modules. • If you install mixed pairs of PC2-4300 (DDR2 533-MHz) and PC2-5300 (DDR2 667-MHz) memory, the modules function at the speed of the slowest module installed. • Ensure that you install a single memory module in DIMM connector 1, the connector closest to the processor, before you install modules in any other connector. . B A A matched pair of modules in DIMM connectors 1 and 2 (white securing clips) B matched pair of memory modules in DIMM connectors 3 and 4 (black securing clips) NOTICE: If you remove your original memory modules from the computer during a memory upgrade, keep them separate from any new modules that you may have, even if you purchased the new modules from Dell. If possible, do not pair an original memory module with a new memory module. Otherwise, your computer may not start properly. You should install your original memory modules in pairs either in DIMM connectors 1 and 2 or DIMM connectors 3 and 4. NOTE: Memory purchased from Dell is covered under your computer warranty. 26 Memory