Dell XPS 630i Service Manual - Page 83
Processor, Removing the Processor - service manual
View all Dell XPS 630i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Processor CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. NOTICE: Do not perform the following steps unless you are familiar with hardware removal and replacement. Performing these steps incorrectly could damage your system board. For technical service, see "Contacting Dell" in your Owner's Manual. Removing the Processor 1 Follow the procedures in "Before You Begin" on page 9. 2 Remove the computer cover (see "Removing the Computer Cover" on page 13). 3 Disconnect the power cables from the POWER and 12V_ATXP connectors (see "System Board Components" on page 16) on the system board. 4 Remove the processor heatsink (see "Removing the Processor Heatsink" on page 79). 5 Push down and out on the socket release lever. 6 Lift the socket release lever and open the processor cover. Processor 83