Dell XPS 630i Service Manual - Page 89
PCI Express Cards - bios
View all Dell XPS 630i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 89 highlights
2 Orient the system board by aligning the screw holes on the system board with the screw holes on the chassis. 3 Replace the 10 screws to secure the system board to the chassis. 4 Replace the processor heatsink (see "Installing the Processor Heatsink" on page 80). 5 Replace any expansion cards that you removed (see "Installing PCI and PCI Express Cards" on page 35). 6 Replace any additional components that you removed from the system board. 7 Reconnect all cables to the system board. 8 Replace the computer cover (see "Replacing the Computer Cover" on page 119). NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into your computer. 9 Connect your computer and devices to electrical outlets, and then turn them on. 10 Flash the system BIOS, as needed. NOTE: For information on flashing the system BIOS, see the Dell Support website at support.dell.com. System Board 89