Denon AVR1910 Owners Manual - English - Page 16

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Connections The AVR-1910 allows connection of inputs from up to 4 HDMI devices and output to 1 TV. DVD )%.* Player 065 Blu-ray )%.* Disc Player 065 SAT/CABLE )%.* Tuner 065 Digital Video )%.* Recorder 065 Monitor )%.* (TV) */ • Use a cable on which the HDMI logo is indicated (a certified HDMI product) for connection to the HDMI connector. Normal playback may not be possible when using a cable other than one on which the HDMI logo is indicated (a non-HDMI-certified product). • When the AVR-1910 is connected to other devices with HDMI cables, also connect the AVR-1910 and TV using an HDMI cable. • When a device supporting Deep Color signal transfer is connected, use a cable compatible with HDMI ver.1.3a. • Video signals are not output if the input video signals do not match the monitor's resolution. In this case, switch the Blu-ray Disc player / DVD player's resolution to a resolution with which the monitor is compatible. NOTE • If the menu "HDMI Audio Out" setting (vpage 28) is set to "AMP", the sound may be interrupted when the monitor's power is turned off. • The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be limited by the HDMI audio specifications of the connected device regarding permissible inputs. Connecting devices n Connecting to a device equipped with a DVI-D terminal When an HDMI/DVI conversion cable (sold separately) is used, the HDMI video signals are converted to DVI signals, allowing connection to a device equipped with a DVI-D terminal. NOTE • No sound is output when connected to a device equipped with a DVI-D terminal. Also make the audio connections. • Signals cannot be output to DVI-D devices that do not support HDCP. • Depending on the combination of devices, the video signals may not be output. n Settings related to HDMI connections Set as necessary. For details, see the respective reference pages. Input terminal assignment (vpage 33) Set this when changing the input sources of the different terminals. HDMI Setup (vpage 28) Make these settings related to HDMI input/output signals. • Auto Lip Sync • HDMI Audio Out • HDMI Control • Standby Source • Power Off Control NOTE The audio signals output from the HDMI connectors are only the HDMI input signals. Connecting Devices not Equipped with HDMI terminals Monitor (TV) • Select the terminal to use and connect the device. • For video connections, see "Converting input video signals for output (Video Conversion Function)" (vpage 9). For instructions on HDMI connections, see "Connecting Devices Equipped with HDMI terminals" on page 12. Monitor (TV) "6%*0 015*$"065 7*%&0 */ 7*%&0 $0.10/&/5
7*%&0 */ : 1# 13 The component video connectors may be indicated differently on your monitor. For details, see the monitor's operating instructions. 13