Denon AVR1910 Owners Manual - English - Page 26

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH 8 Press . This returns you to analysis results items, so repeat step 7. Front 9 Press i to select "Next", then press . 10 Press ui to select "Store", then press . "Storing Please wait..." is displayed on the on-screen display while the results are being stored. When storing is complete, "Storing complete. Auto Setup is now finished." is displayed on the on-screen display. b If you do not want to save the measurement results, use ui to select "Cancel", then select "Yes" using o p. All the measured Audyssey Auto Setup data will be erased. Step5:Store MultEQ Please select "Store" to store measurement values. Store Cancel [ENT]:Store ⇩ Step5:Store MultEQ Storing Please wait... NOTE Do not turn the power off while the settings are being stored. Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) NOTE Do not change the speaker connections or subwoofer volume, or speaker locations after making measurements. If changes are necessary, make the changes and use the Audyssey Auto Setup once again for an updated EQ solution. • If the result differs from the actual connection status or an error message appears, use ui to on-screen display "Retry" and then press to repeat the measurement. • If the result still differs from the actual connection status after remeasurement or the error message still appears, it is possible that the speakers are not connected properly. Turn the AVR-1910 off, check the speaker connections and repeat the measurement process from the beginning. • For instance, If the location or direction of a speaker is altered, the Audyssey Auto Setup should be performed again to ensure the correct EQ solution for the new room configuration. 12 Disconnect the setup microphone from the AVR1910. 23