Denon AVR1910 Owners Manual - English - Page 48

Getting Started Connections Settings Playback Multi-Zone Remote Control Information Troubleshooting Specifications ENGLISH Setting items Setting contents Center Image 0.0 ~ 1.0 (0.3) Assign center channel signal to front left and right channels for wider sound. Panorama ON : Set. Assign front L/R signal also OFF : Do not set. to surround channels, for wider sound. Dimension 0 ~ 6 (3) Shift sound image center to front or rear, to adjust playback balance. Center Width 0 ~ 7 (3) Assign center channel signal to front left and right channels for wider sound. Delay Time 0ms ~ 300ms (30ms) Adjust delay time to control sound stage size. Effect Level 1 ~ 15 (10) Adjust the strength of the surround effect. Set to a lower level if the positioning and sense of phase of the surround signals seems unnatural. Room Size Small : Simulate acoustics of a small room. Determine size of acoustic Medium small : Simulate acoustics of a medium-small room. environment. Medium : Simulate acoustics of a medium room. Medium large : Simulate acoustics of a medium-large room. NOTE Large : Simulate acoustics of a large room. "Room Size" does not indicate the size of the room in which sources are played. Adjusting the Sound Field Effect (Parameter) Setting items Setting contents AFDM (Auto Flag Detect ON : Set. Mode) OFF : Do not set. Detects the source's surround back channel signal and sets the optimum surround mode automatically. Surround Back n F or 2-channel sources Sets the method of ON : The surround back channel is used. generating of the surround OFF : No signal is played from the surround back channels. back channel. n F or multi channel sources Set this to set the method of generating of the surround back channel for sources that do not include surround back signals and when you do not want to play the surround back signals included in the source. Check the audio signals of the source being played before making this setting. OFF : No signal is played from the surround back channels. MTRX ON : Generate and play the surround back signals from the surround channel signals. PLgx CINEMAz1 : Generate and play the surround back signals by decoding the signals in the "Dolby Pro Logic gx Cinema" mode. PLgx MUSICz2 : Generate and play the surround back signals by decoding the signals in the "Dolby Pro Logic gx Music" mode. ES MTRX : Generate and play the surround back signals from the surround channel signals of the DTS source. ES DSCRTz3 : Play the surround back signals included in the 6.1- channel DTS source. DSCRT ONz3 : Play the surround back signals included in the 7.1- channel source. z1 : This can be selected when "S.Back" in the "Speaker Config." settings (vpage 26) is set to "2sp". z2 : This can be selected when "S.Back" in the "Speaker Config." settings (vpage 26) is set to "2sp" or "1sp". z3 : When "AFDM" is set to "ON", the surround back channel is played with the AFDM function. When selected while "AFDM" is set to "OFF", the source's surround back signals are played. This can also be set by pressing . NOTE This is valid when the "Amp Assign" setting (vpage 25) is set to "7.1- channel surround back" or "6.1-channel surround back", and when the "S.Back" setting (vpage 26) is set to "Large" or "Small". 45 Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu