Dymo Rhino 6000 Industrial Label Printer User Guide - Page 8

Recharging the Battery Pack The battery pack automatically recharges while the printer is connected to a power source through the power adapter. Charging the battery pack for the first time will take approximately eight hours; recharging the battery pack will take approximately two hours. Inserting and Removing the Tape Cassette Your printer comes with a starter tape cassette. Visit www.dymo.com for information about purchasing additional tape cassettes. To insert the tape cassette 1. Gently lift the tape cassette door on the back of the printer. 2. Make sure the tape and ribbon are taut across the mouth of the cassette and that the tape passes between the guides. If necessary, turn the ribbon rewind spool clockwise to tighten the ribbon. 3. Insert the cassette with the tape and ribbon positioned between the guideposts. Lift Guide posts Ribbon rewind spool Eject Button Figure 4 4. Press gently on the cassette until the cassette moves into place. The insertion mechanism will guide the cassette into place. 5. Close the tape cassette door. To remove the tape cassette 1. Gently lift the tape cassette door on the back of the printer. 2. Press the cassette eject button. The tape cassette is lifted from the printer. 3. Gently remove the tape cassette. 4. Insert a new tape cassette as described above. 5. Reset the tape width as described in Setting the Tape Width. Setting the Tape Width Each time you insert a tape cassette into the printer, you are prompted to set the tape width so the printer knows what size label tape you are currently using. Some of the features you use to design labels are dependent on the width of the tape. However, to create a label for a tape width different than what is currently in the printer, you can set the tape width from the Settings menu. To set the tape width 1. Press SETTINGS. The Settings menu appears on the display. 2. Select Tape Width. 3. Select the width of the label tape currently inserted in the printer. 4. Press OK and then select Done (ESC). Selecting a Language Several language-related features on the printer are determined by the language setting, such as special characters, menu text, and so on. By default the language is set to English. To select a language 1. Press SETTINGS and select Language. 2. Select the language. 3. Press OK and then select Done (ESC). 2