Dymo Rhino 6000 Industrial Label Printer User Guide - Page 9
Selecting Units of Measure, Getting to Know Your Printer, Power, LCD Display, Using the Backlight
View all Dymo Rhino 6000 Industrial Label Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Selecting Units of Measure You can choose to work in inches or millimeters. To select the units of measure 1. Press SETTINGS and select Units. 2. Select Inch or mm. 3. Press OK and then select Done (ESC). Getting to Know Your Printer Become familiar with the location of the feature and function keys on your printer. See Figure 1 on the inside front cover. The following sections describe each feature in detail. Power The button turns the power on and off. If no keys are pressed after five minutes, the power is turned off automatically. When the printer is turned off, the current label file and its settings are remembered for the next time the printer is turned on. If the battery pack and power adapter are disconnected at the same time, some of the settings are remembered; however, the current label file is lost and you will need to reset the tape width when you reconnect the power and turn on the printer. LCD Display The printer's LCD display includes a caption bar across the top, showing the current label type, and feature indicators on the right side, showing which features are currently selected. See Figure 5. Caption bar Feature indicators Battery level indicator Figure 5 When the text you have entered will not fit on the label as currently defined, the portion of the text that will not fit is shaded. If you attempt to print the label containing text that will not fit, the excess text will not be printed. Using the Backlight In low light conditions, you can turn on the backlight to make it easier to see the display. To save power, the back light will turn off automatically after 15 seconds of inactivity. Pressing any key will turn the backlight back on again. The backlight key acts as a toggle to turn the light on and off. To toggle backlighting on and off ♦ Press . Adjusting the Display Contrast In addition to backlighting, you can adjust the display contrast to help in different lighting conditions. To adjust the display contrast 1. Press SETTINGS. 2. Select LCD contrast and press OK. 3. Use the arrow keys to select a value between 0 (lighter) and 8 (darker). The contrast changes as you select the different settings. 4. Press OK, and then select Done (ESC). 3