EVGA 132-YW-E179-TR User Guide - Page 17

One DIMM, Two DIMMS, Four DIMMS

Get EVGA 132-YW-E179-TR PDF manuals and user guides View all EVGA 132-YW-E179-TR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 17 highlights

There are many different fan types that can be used with this motherboard. Follow the instruction that came with you fan assembly. Be sure that the fan orientation is correct for your chassis type and your fan assembly. Your new motherboard has four 240-pin slots for DDR3 memory. These slots support 256 MB, 512 MB, 1 GB, and 2 GB DDR3. There must be at least one memory bank populated to ensure normal operation. Use the following the recommendations for installing memory. (See Figure 1 on page 5 for the location of the memory slots.) For memory over 1600MHz(PC3 12800) use slots 2 and 3 (black).  One DIMM: Install into slot 3. You can install the DIMM into any slot; however, slot 3 is preferred.  Two DIMMS: Install into either slots: 0 and 1 or 2 and 3. The idea is to not have the DIMMS in adjacent slots.  Four DIMMS: Install into slots 0, 1, 2, and 3. CPU side DIMM Slot 0 DIMM Slot 2 DIMM Slot 1 DIMM Slot 3 Board edge

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
There are many different fan types that can be used with this motherboard. Follow
the instruction that came with you fan assembly. Be sure that the fan orientation is
correct for your chassis type and your fan assembly.
Your new motherboard has four 240-pin slots for DDR3 memory. These slots
support 256 MB, 512 MB, 1 GB, and 2 GB DDR3. There must be at least one
memory bank populated to ensure normal operation.
Use the following the
recommendations for installing memory. (See Figure 1 on page 5 for the location
of the memory slots.)
For memory over 1600MHz(PC3 12800) use slots 2 and 3 (black).
One DIMM
:
Install into slot 3. You can install the DIMM into any slot;
however, slot 3 is preferred.
Two DIMMS
:
Install into either slots: 0 and 1 or 2 and 3. The idea is to not
have the DIMMS in adjacent slots.
Four DIMMS
:
Install into slots 0, 1, 2, and 3.
DIMM Slot 0
DIMM Slot 2
DIMM Slot 1
DIMM Slot 3
CPU side
Board edge