EVGA 132-YW-E179-TR User Guide - Page 52

 IDE HDD Block Mode Using this function on the Integrated Peripherals menu allows your IDE hard drive needs to support block mode. Select [Enabled] to automatically detect the optimal number of block read/writes per sector the drive can support. Select [Disabled] if your drive does not support block mode. Press Enter to display the RAID Config menu. RAID Enable SATA 1 (A0) RAID SATA 2 (A1) RAID SATA 3 (B0) RAID SATA 4 (B1) RAID SATA 5 (C0) RAID SATA 6 (C1) RAID [Enabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled] [Disabled]  RAID Enable Use this function to enable or disable RAID. When RAID is set to [Disabled], all SATA functions are changed to Disabled and cannot be changed. RAID Enable x SATA 1 (A0) RAID x SATA 2 (A1) RAID x SATA 3 (B0) RAID x SATA 4 (B1) RAID x SATA 5 (C0) RAID x SATA 6 (C1) RAID [Disabled] Disabled Disabled Disabled Disabled Disabled Disabled  SATA x Primary/Secondary When RAID Enable is set to [Enabled], you can enable or disable the various SATA functions. Press Enter to display the USB Config menu. OnChip USB USB Keyboard Support USB Mouse Support [V1.1+V2.0] [Enabled] [Enabled]  OnChip USB Use this function to enable specific versions of the USB or disable the onchip USB. When the onchip USB is set to [Disabled], the keyboard and mouse support functions are set to V1.1+V2.0 and cannot be OnChip USB x USB Keyboard Support [Disabled] Enabled changed. Versions that can x USB Mouse Support Enabled be selected are [V1.1+V2.0] or [V1.1].