Epson MovieMate 72 User's Guide - Page 43
Adjusting Dolby Audio Settings, Setting Video Options
View all Epson MovieMate 72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
■ Default: Press and press to return all settings to their factory defaults (except for the Disc Lock password and lamp hours). ■ Password: See page 39 for instructions on setting a password for locking DVDs. ■ Disc Lock: See page 39 for instructions on setting a password for locking DVDs. 5. To exit the Setup menu, press . Adjusting Dolby Audio Settings You can adjust settings for external equipment with a DTS/Dolby Digital Decoder or DVDs recorded in Dolby Digital. 1. Press the button on the remote control. You see the Language Setup Page: 2. Press to display the Audio Setup Page. 3. Press to highlight Digital Output or Night Mode, then press to select it. You can select the following settings: ■ Digital Output: Change to Stream if you have connected a DTS/Dolby Digital Decoder to the Audio-Out port. ■ Night Mode: Turn this setting on if you are watching a Dolby Digital DVD at low volume. 4. Press to select the setting you want to change, then press to save it. 5. To exit the menu, press . Setting Video Options You can use the Visual Setup menu to adjust the signal format for external video equipment and set other video options. 1. Press on the remote control. You see the Visual Setup menu. 2. Press to highlight Option, then press to select it. 3. Press until you see the option you want to set. Doing More with Epson MovieMate 43