Epson RX700 Basics - Page 68
Removing a Memory Card
UPC - 010343853775
View all Epson RX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
1. Remove any memory cards from the RX700. 2. Connect your USB drive to the RX700 as shown on page 66. 3. When you see this screen, use the u and d buttons select which folder to print from, then press OK. 4. Press the Memory Card button, then follow the same steps as you would to print from your camera's memory card (see page 27). Removing a Memory Card Once you're finished copying photos from your memory card to your computer, follow the steps below to prepare your computer before removing the card. Be sure to remove any cards before unplugging the USB cable from your RX700. Caution: Do not eject a card while the memory card light is flashing, or without performing the steps described below, or you may lose data on the card. Be sure all cards have been removed before unplugging the USB cable. 1. On a Macintosh, drag the memory card icon from your desktop to the trash. If you're using Windows XP or 2000, click the Unplug or Eject Hardware icon on the taskbar. In Windows XP, click Safely Remove USB Mass Storage Device. In Windows 2000, click Stop USB Mass Storage Device. Note: In Windows 98 or Me, you don't need to do anything on your computer before removing a card. 2. Remove the card by pulling it straight out of the slot. 68 Saving and Storing Photos