Epson RX700 Basics - Page 73
Cleaning the Print Head - stylus photo help
UPC - 010343853775
View all Epson RX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
5. Examine the nozzle check pattern you printed. Each staggered line should be solid, with no gaps, as shown. ■ If your printout looks okay, you're done. Press Back to return to the Setup menu. ■ If you see any gaps, as shown below, press OK and follow the instructions on the screen to clean the print head. Cleaning the Print Head Follow these steps to clean the print head so it can deliver ink properly. Print head cleaning uses ink, so clean it only if quality declines. Note: You can also clean the print head using the printer software. Click the ? or Help button on your printer settings screen for instructions on running the print head cleaning utility. 1. Make sure the Stylus Photo RX700 is turned on but not printing. 2. Press the Setup button. 3. Use the u and d buttons to select Head Cleaning. 4. Press the OK button, then press OK again to start cleaning. Cleaning takes about a minute, and you see a message on the RX700 screen indicating that cleaning is in progress. 5. When cleaning finishes, press OK to print a nozzle check pattern to check the results (see page 72). If you don't see any improvement after cleaning three or four times, check the solutions beginning on page 78. You can also turn the Stylus Photo RX700 off and wait overnight-this allows any dried ink to soften-and then try cleaning the print head again. Checking and Cleaning and Print Head 73