Epson RX700 Basics - Page 85
Notices, Important Safety Instructions
UPC - 010343853775
View all Epson RX700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Notices Important Safety Instructions Before using your Epson Stylus Photo RX700, read and follow these safety instructions: ■ Be sure to follow all warnings and instructions marked on the Stylus Photo RX700. ■ Use only the type of power source indicated on the Stylus Photo RX700 label. ■ Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as air control systems or other high-load devices that regularly switch on and off. ■ Place the Stylus Photo RX700 near a wall outlet where the plug can be easily unplugged. ■ Do not let the power cord become damaged or frayed. ■ If you use an extension cord with the Stylus Photo RX700, make sure the total ampere rating of the devices plugged into the extension cord does not exceed the cord's ampere rating. Also, make sure the total ampere rating of all devices plugged into the wall outlet does not exceed the wall outlet's ampere rating. ■ Avoid electrical outlets controlled by wall switches or automatic timers. ■ Keep your Stylus Photo RX700 and computer system away from potential sources of electromagnetic interference, such as loudspeakers or cordless telephone base units. ■ Avoid locations that are subject to rapid changes in heat or humidity, shocks or vibrations, or dust. ■ Leave enough room around the Stylus Photo RX700 for sufficient ventilation. ■ Do not place the Stylus Photo RX700 near a radiator or heating vent or in direct sunlight. ■ Place the Stylus Photo RX700 on a flat, stable surface that extends beyond its base in all directions. It will not operate properly if it is tilted. If you place this product by a wall, leave at least 4 inches (10 cm) between the back of the product and the wall. ■ Turn off and unplug the Stylus Photo RX700 before cleaning. Clean with a damp cloth only. Do not spill liquid on it. ■ Always turn the Stylus Photo RX700 off using the P On button. Don't turn off the power using a switch on a power strip or unplug the Stylus Photo RX700 until the P On light and LCD panel turn off. 85