Epson WorkForce 600 Quick Guide - Page 11
Restoring, Cropping, or Copying Photos - not printing black
View all Epson WorkForce 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
8. To change print settings, press Menu and then OK to select Paper and Copy Settings. The Layout setting should be With Border and the Paper Size should be Letter. ■ To adjust the copy size, press d to select Reduce/Enlarge, press r, then press u or d to choose Actual (and select a percentage using + or -), Auto Fit Page (to automatically size the image to fit your paper), or one of the specific sizes listed. Then press OK. Note: If you're using the Auto Document Feeder to copy a document, you can only select Actual at 100% or Legal -> Letter. ■ Press d to scroll down to the Paper Type setting and select Plain Paper. ■ For the Document Type setting, choose Text for plain documents or Text & Image if your document contains photos or graphics. ■ To change the copy quality (for plain paper only), select Quality, press r, then press u or d to choose Draft, Standard Quality, or Best. Press OK. 9. After you finish selecting your settings, press OK. 10. Press x Start to begin copying. To cancel copying, press y Stop/Clear Settings. Restoring, Cropping, or Copying Photos You can copy one or two photos onto 4 × 6-inch, 5 × 7-inch, or letter-size photo paper for instant photo reprints. You can also restore colors in faded photos, print with or without borders, convert photos to black and white, and crop your photos. 1. Place one or two photos on the scanner glass. Place them at least 1/4 inch (5 mm) apart. 2. Load 4 × 6-inch, 5 × 7-inch, or letter-size Epson photo paper in the sheet feeder. Restoring, Cropping, or Copying Photos 11