Epson WorkForce 610 Quick Guide - Page 12

7. To change print settings, press Menu and then OK to select Paper and Copy Settings. The Layout setting should be With Border. ■ To adjust the copy size, press d to select Reduce/Enlarge, press r, then press u or d to choose Actual (and select a percentage using + or -), Auto Fit Page (to automatically size the image to fit your paper), or one of the specific size settings listed. Then press OK. Note: If you're using the Auto Document Feeder to copy a document, you can only select Actual at 100% or Legal -> Letter. ■ Press d to select Paper Size, press r, then press u or d to choose the size of paper you loaded. Press OK. (Paper Size options depend on the Paper Type setting you choose and whether your originals were loaded on the scanner glass or in the Automatic Document Feeder.) ■ Press d to select Paper Type, press r, then press u or d to select Plain Paper. Or if you're using Epson special paper, choose the setting for the paper you loaded (see page 14). Then press OK. Note: If you're using the Automatic Document Feeder, Plain Paper is automatically selected. ■ Press d to select Document Type, press r, then press u or d to choose Text for plain documents or Text & Image if your document contains photos or graphics. Then press OK. ■ To change the copy quality (for plain paper only), press d to select Quality, press r, then press u or d to choose Draft, Standard Quality, or Best. Then press OK. 8. After you finish selecting your settings, press OK. 9. Press x Start to begin copying. To cancel copying, press y Stop/Clear Settings. 12 Copying a Document or Photo