Epson WorkForce 610 Quick Guide - Page 42
Replacing Ink Cartridges - print head
UPC - 010343871878
View all Epson WorkForce 610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Replacing Ink Cartridges Make sure you have a new ink cartridge before you begin. You must install new cartridges immediately after removing the old ones. Caution: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability. Leave the expended cartridge(s) installed until you have obtained a replacement, or the ink remaining in the print head nozzles may dry out. 1. Turn on your product. If a cartridge is expended, you see a message on the display screen. Note which cartridges need to be replaced and press OK. (You cannot print until you have replaced any expended ink cartridges.) If you're replacing a cartridge before you see a message on the display screen, press the Home button, press l, r, u, or d to select Setup, then press OK. Press l or r to select Maintenance, then press OK. Select Ink Cartridge Replacement and press OK. 2. Lift up the scanner, then open the cartridge cover. 3. Squeeze the tab on the cartridge and lift it straight up. Dispose of it carefully. Do not take the used cartridge apart or try to refill it. Warning: If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water. Keep ink cartridges out of the reach of children. 42 Maintaining Your All-in-One