Fluke Ti55FT-20 User Manual - Page 13

Introduction, Your camera contains a Class 2 laser pointer. See diagram

Page 13 highlights

1 Introduction Safety Information A W Caution identifies conditions and actions that could damage the camera or cause permanent loss of data. W Caution • To avoid damaging your Camera, treat it with care as you would any type of precision equipment. • Your infrared camera is a precision instrument that uses a sensitive infrared (IR) detector. Pointing your camera towards highly-intense energy sources-including devices that emit laser radiation and reflections from these devices-may adversely affect camera accuracy and may harm or permanently damage your camera's IR detector. • Your camera was calibrated prior to shipping. We recommend that you have your camera checked for proper calibration every two years. Some ISO 9000 programs require more frequent checks for certification. Contact Fluke for details. • Your camera requires three minutes to warm up before accurate measurements are available. *W Warning • Your camera contains a Class 2 laser pointer. See diagram in Appendix B for laser aperture location. • To avoid eye damage, do not point laser directly at eye or indirectly off reflective surfaces. • Use of controls or adjustments or performance or procedures other than those specified herein may result in hazardous laser radiation exposure. • Do not use camera in a manner not specified in this manual or the protection provided by the equipment may be impaired. 1-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132

Introduction
Safety Information
1
1-3
A
W
Caution
identifies conditions and actions that could damage the camera
or cause permanent loss of data.
W
Caution
To avoid damaging your Camera, treat it with care as you
would any type of precision equipment.
Your infrared camera is a precision instrument that uses a
sensitive infrared (IR) detector. Pointing your camera
towards highly-intense energy sources—including devices
that emit laser radiation and reflections from these
devices—may adversely affect camera accuracy and may
harm or permanently damage your camera’s IR detector.
Your camera was calibrated prior to shipping. We
recommend that you have your camera checked for proper
calibration every two years. Some ISO 9000 programs
require more frequent checks for certification. Contact
Fluke for details.
Your camera requires three minutes to warm up before
accurate measurements are available.
*W
Warning
Your camera contains a Class 2 laser pointer. See diagram
in Appendix B for laser aperture location.
To avoid eye damage, do not point laser directly at eye or
indirectly off reflective surfaces.
Use of controls or adjustments or performance or
procedures other than those specified herein may result in
hazardous laser radiation exposure.
Do not use camera in a manner not specified in this
manual or the protection provided by the equipment may
be impaired.