Fluke Ti55FT-20 User Manual - Page 76
Using User-Defined Display Screen, Temperature Markers
View all Fluke Ti55FT-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55 Users Manual Using User-Defined Display Screen Temperature Markers Note This feature is available on TiR2, TiR4, Ti45 and Ti55 models only. In addition to basic display screen temperature markers (see Chapter 4), the IRFlexCam offers the following advanced marker options available in scan target mode and/or on a saved image you open: • Up to three user-defined spot temperatures each marked with a crosshair. • Up to three user-defined area markers each indicated by a custom-sized box. To enable the user-defined spot temperature and area markers: 1. Assign the Marker toolbar visible function to a programmable button (see Chapter 2). 2. From scan target mode or from an open image, tap the programmable button; the Marker toolbar appears in the upper left corner of the display screen. To add spot temperature markers to the display screen from either scan target mode or from an open image: 1. Use the mouse controller to position the pointer over the crosshair icon in the Marker toolbar. 2. Tap E. 3. Use the mouse controller to position the mouse crosshair over the image spot desired. 4. Tap E to place a spot temperature marker. The marker name, followed by the temperature of that spot appears on the display screen. 5. Repeat Steps 3-4 to add up to two additional spot temperature markers. 6. Select the rectangle icon from the Marker toolbar to add area markers (see the next set of procedures), or tap the programmable button to close the Marker toolbar and return either to scan target mode or to the open image. From an open image, tap again to return to scan target mode. 7-4