Fluke Ti55FT-20 User Manual - Page 68
Changing Lens Selection, Setting Date and Time, Camera Settings, Language, Compact Flash, Internal
View all Fluke Ti55FT-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
TiR2,TiR3,TiR4,Ti40,Ti45,Ti50,Ti55 Users Manual Changing the Language To change the language setting: 1. Tap F. 2. Use the mouse controller to position the pointer over Camera Settings on the popup menu. 3. Tap E to select. 4. Position the pointer over the Locale tab and tap E to select. 5. Use the mouse controller and E to choose the desired language setting from the Language pull down menu. 6. Tap to accept setting change and return to scan target mode. Saving and Reloading Camera Settings You can save your current camera settings to a Compact Flash card (recommended if using a shared camera to access your custom settings on multiple cameras) or to the camera's internal memory (recommended if there is only one user). When you power on your Camera, settings such as the color palette, temperature units, programmed function buttons, etc., that you previously saved are loaded from the memory card into the camera operating memory. If you are not using a memory card or if the memory card has no stored settings, camera factory settings are loaded first followed by any internal camera settings you previously saved. Internal camera settings override the factory settings. Visible light camera module (VLCM) settings are saved and loaded just as other settings are. To save current camera settings to the camera's internal memory or to a Compact Flash card: 1. Tap F. 2. Use the mouse controller to position the pointer over Camera Settings on the popup menu. 3. Tap E. 4. Position the pointer over the Save tab and tap E. 5. Position the pointer over either Compact Flash or Internal in the Save Settings To row and tap E. 6-6