Fluke Ti55FT-20 User Manual - Page 19
Power Camera On, trigger - 54 7 5
View all Fluke Ti55FT-20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
1 Introduction Set Temperature Level and Span Set Temperature Level and Span 1. Press G as shown in Figure 1-6 to automatically set the camera's temperature level and span. 2. Press G again as needed to properly scale the image. Level & Span Figure 1-6. Setting the Level and Span eii006.eps Set IR-Fusion® Blend Level Note IR-Fusion® blending is disabled with optional 10 and 54-mm lenses. 1. Press and hold G until the IR-Fusion® blend level dialog box appears on the display screen. 2. While continuing to press G, use the mouse controller shown in Figure 1-7 to slide the IR-Fusion® blend level bar in the dialog box to the desired setting. 3. Tap the trigger button ( ) to retain settings. 1-9
Introduction
Set Temperature Level and Span
1
1-9
Set Temperature Level and Span
1.
Press
G
as shown in Figure 1-6 to automatically set the camera’s
temperature level and span.
2.
Press
G
again as needed to properly scale the image.
Level & Span
eii006.eps
Figure 1-6. Setting the Level and Span
Set IR-Fusion® Blend Level
Note
IR-Fusion® blending is disabled with optional 10 and 54-mm lenses.
1.
Press and hold
G
until the IR-Fusion
®
blend level dialog box appears on
the display screen.
2.
While continuing to press
G
, use the mouse controller shown in
Figure 1-7 to slide the IR-Fusion
®
blend level bar in the dialog box to the
desired setting.
3.
Tap the
trigger
button (
) to retain settings.