Garmin GPSMAP 276C Owner's Manual - Page 113
Using xImage for Customized Waypoint Icons, Installing and Removing Data Cards, To install a data card - manual download
UPC - 753759044138
View all Garmin GPSMAP 276C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Using xImage for Customized Waypoint Icons Use xImage to exchange images between your computer and your GPSMAP 276C. You can download and save screenshots of any screen shown on your unit. xImage also allows you to download customizable splash screens and waypoint symbols from compatible GPS units, customize them (if you have an image editing program on your computer), and send them back to your GPS unit. You can download xImage from the Garmin Web site at www.garmin.com/ximage/�. See the xImage Help file for complete instructions on using xImage. Installing and Removing Data Cards The GPSMAP 276C uses an optional Garmin data card to show digital charts and maps. Install the data card in the card slot located on the bottom of the unit. Install or remove the data card at any time, whether the unit is on or off. You can load a variety of information on your data card, such as MapSource detailed maps. You can also buy preprogrammed cards to use with your GPSMAP 276C Data cards are not waterproof, should not be exposed to moisture or excessive static charges, and should be stored in the case supplied with the card. Appendix > Installation Information To install a data card: 1. Insert the card into the slot on the bottom of the unit. Be sure the label is facing the front of the unit. 2. Firmly push the card into the unit. It is not necessary to force the card. The handle is still exposed when it is properly inserted. 3. If the unit is on, a confirmation tone sounds. The first time you insert a programmed data card, the unit takes a few seconds to read the card. After the data card has been properly installed and accepted, a summary screen noting the card details appears. Press Enter to acknowledge. If you insert a data card and get a "card format not recognized" message, try removing the card and reinserting it. If the card is still not recognized, contact Garmin or your Garmin dealer. To remove a data card: 1. Grasp the card handle. The handle expands for easy removal. 2. Pull the card out of the card slot on the bottom of the unit. 3. If the unit is on, a confirmation tone sounds when the data card has been removed. GPSMAP 276C Owner's Manual 105