Garmin GPSMAP 276C Owner's Manual - Page 41
To add a proximity waypoint, To clear one or all proximity waypoints from the list, Proximity Alarm
UPC - 753759044138
View all Garmin GPSMAP 276C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2. Highlight the field below Proximity Alarm, and press Enter. 3. Select the On or Off setting, and press Enter. To add a proximity waypoint: 1. From the Proximity sub tab, use the ROCKER to highlight an empty line on the Proximity List, and press Enter. The Find Menu opens. 2. Select a waypoint or point of interest from the Find Menu. 3. With OK highlighted, press Enter to select the point. The distance field is now highlighted. Press ENTER to begin entering the proximity radius. 4. Use the ROCKER to enter a distance value (up to 99.99 units), and press Enter. Marine Mode > Creating and Using Waypoints To clear one or all proximity waypoints from the list: 1. Highlight the Points tab on the Main Menu, and then select the Proximity sub tab. 2. Highlight the proximity waypoint to clear, and press Menu. Proximity Points Tab Options Menu 3. To clear a single alarm, highlight Remove Point, and press Enter. To clear all proximity waypoints, select Remove All, and press Enter. 4. Highlight OK, and press Enter to confirm. GPSMAP 276C Owner's Manual 33