Garmin GPSMAP 276C Owner's Manual - Page 118
To set up Loran TD from the Main Menu, LORAN TD Position Format Handbook
UPC - 753759044138
View all Garmin GPSMAP 276C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
Appendix > LORAN TD Setup To set up Loran TD from the Main Menu: 1. Highlight the Setup tab on the Main Menu, and then highlight the Location sub tab. 2. Highlight the Location Format field, and press Enter. Location Sub Tab 3. Highlight Loran TD, and press Enter. 4. Highlight the Setup button located on the right side of the Location Format field, and press Enter. The Loran TD Setup window appears. 5. To change the settings of any of the five fields, highlight the field, press Enter, select a setting using the ROCKER, and press ENTER again. LORAN TD Setup 6. When finished, highlight the Save button, and press Enter. If the active GRI Chain, secondary stations, or offsets were changed since the waypoint was created, the waypoint now references the active GRI chain and secondary stations and adjust the TD coordinates accordingly. Remember that the GPS is not relying on the LORAN signal for navigation and actually converts the TD coordinate to a useful latitude and longitude coordinate before storing the waypoint to memory or using it for navigation. Because of this, the unit can navigate to a TD coordinate anywhere in the world. You must know your GRI chain number and secondary stations to create a LORAN TD position. For more information, read our LORAN TD Position Format Handbook, available at the Garmin Web site, at www.garmin.com/support/userManual.html. 110 GPSMAP 276C Owner's Manual