Hayward OmniLogic Operation Manual - Page 16

ColorLogic Lights 1 / 2 vsp cooling alarm light row heater cleaner POOL features uclights chlorinator 1 / 2 ON VoodooLounge Tranquility USA Twilight Gemstone Mardi Gras UCL color shows ColorLogic Control Screen Selections - select the desired light show or solid color. 1 / 2 ON VoodooLounge Tranquility USA Twilight Gemstone Mardi Gras UCL color shows Synchronize- Touch this button to synchronize the ColorLogic lights. The ColorLogic lights will then default to Voodoo Lounge. Turn On / Turn Off - Slide this switch to manually turn on/off the ColorLogic lights. This will override schedules or timer settings. Set Schedule - Touch this button to set a schedule for the ColorLogic lights. Countdown Timer - Touch this button to set a countdown timer for the lights. Light Show/Color - This button will change the selection between light shows and solid colors. You can set schedules for the ColorLogic light as well as a countdown timer. This procedure has been shown previously. Note that after the countdown interval, the lights will go off regardless of their previous state. Light Show/Color - From the ColorLogic Control Screen, select the desired show or color. Use the Advance button to show all of the available selections. Use the Light Show/Color button to switch between all light shows and all solid colors. Synchronize - Because changing colors and shows requires interrupting power to the ColorLogic lights, there is a chance that the lights could lose synchronization due to timing issues. If you find that the color or show does not correspond with the selection that you've made, the lights may be out of sync. Touch the Synchronize button to re-sync the ColorLogic lights. 16 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS