Hayward OmniLogic Operation Manual - Page 28

Wired Networking You can view the OmniLogic ip address at this screen. This is the address that the router will use to connect the OmniLogic to the home network. You can also turn the connection to the router on and off using the On/Off toggle. Web Server The OmniLogic connects to Hayward servers to enable remote control through the web using computers and mobile devices. This screen will display the ip address of this connection to the server. You can also turn the connection on and off using the On/Off toggle. firmware upgrade 1 / 2 restore config config wizard display system info wired networking backup config web server SYSTEM configuration date/time language data log shell command SYSTEM configuration 2 / 2 wifi bridge Date/Time Set the date and time on this screen. Language Select desired language. Data Log (requires Thumb Drive) Use this feature if instructed by Hayward Technical Service. The data log shows a log of daily operation and can help Hayward Technical Service diagnose or troubleshoot problems. The Data Log options are: Clear Log File- this will delete all data in the log file. Show Log File - this will display the log file. Restore Defaults - this will return the data log settings to the factory default. Set Level - you can change the amount of detail that is shown in the log file with this button. You can also enable and disable data logging using the On/Off toggle. Shell Command This screen is reserved for trained service personnel only. Wifi Bridge Use Wifi Bridge if adding a HLWLAN wireless transceiver to the OmniLogic or making changes to the wireless connection of a HLWLAN that is already installed. Refer to the HLWLAN for detailed instructions. 28 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS