HP 113394 User Guide - Page 93

Section 6 Statistics Functions Accumulating Statistics The hp 12c platinum can perform one- or two-variable statistical calculations. The data is entered into the calculator using the _ key, which automatically calculates and stores statistics of the data into storage registers R1, through R6. (These registers are therefore referred to as the "statistics registers.") Before beginning to accumulate statistics for a new set of data, you should clear the statistics registers by pressing fCLEAR².* In one-variable statistical calculations, to enter each data point - referred to as an "x-value" - key the x-value into the display, then press _. In two-variable statistical calculations, to enter each data pair - referred to as the "x and y-values": 1. Key the y-value into the display. 2. Press \. 3. Key the x-value into the display. 4. Press _. Each time you press _, the calculator does the following: z The number in R1 is increased by 1, and the result is copied into the display. z The x-value is added to the number in R2. z The square of the x-value is added to the number in R3. z The y-value is added to the number in R4. z The square of the y-value is added to the number in R5. z The product of the x and y-values is added to the number in R6. * This also clears the stack registers and the display. 93 File name: hp 12c pt_user's guide_English_HDPMF123E27 Page: 93 of 275 Printed Date: 2005/8/1 Dimension: 14.8 cm x 21 cm