HP 4400 HP StorageWorks Fabric OS 6.4.1 Release Notes (5697-0760, November 201 - Page 69
Fabric OS 6.4.0a fixes, lists defects closed in the Fabric OS 6.4.0a firmware release.
View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Fabric OS 6.4.0a fixes Table 10 lists defects closed in the Fabric OS 6.4.0a firmware release. Table 10 Fabric OS 6.4.0a closed defects Closed defect summary As a result of firmwaredownload, systemverifcation test, or blade insertion, occasionally 10/24 FCoE blade may turn faulty 21. Solution Fixed in Fabric OS 6.4.0a Workaround prior to upgrade: Use slotpoweroff/on the FCoE10-24 to clear the faulty state. In FICON environment, FRU events are not generated on the operator's Fixed in Fabric OS 6.4.0a console for removal or insertion. Rare corner case of Lossless DLS being disabled after several downgrade and upgrade scenarios. A DC SAN Backbone director logical switch with port-based routing, IOD (In-Order Delivery), DLS, and Lossless DLS enabled running Fabric OS 6.3.0b was updated to 6.4.0, and Lossless DLS gets disabled. Fixed in Fabric OS 6.4.0a Workaround prior to upgrade: Re-enable Lossless / IOD on logical switches that were previously enabled. With FMS enabled, after moving all ICL and 254 FC ports into a logical Fixed in Fabric OS 6.4.0a switch with zero based addressing, port 1/0 (area 00) is incorrectly disabled. Data encryptio, name server fails to show the existence of a specific virtual initiator. As a result of an external FC port experiencing an excessive number of encoding CRC errors, the internal ports are faulted incorrectly by switch firmware, hence a data encryption virtual initiator associated with the internal port fails to appear in name server. Fixed in Fabric OS 6.4.0a Workaround prior to upgrade: Remove the condition / cause of the excessive CRC errors (that is, replace cable or SFP). Unexpected reboot and failover when attempting to push zone DB from DCFM in IM2/IM3 fabrics. Fixed in Fabric OS 6.4.0a Workaround prior to upgrade: Use CLI (or ECFM for non-TI/Redirect zones) in IM2/IM3. In FICON environment, NSD panic while running IRNDUP to 4/256 SAN director due to missing interrupt (IFCC). Fixed in Fabric OS 6.4.0a A LUN sized greater than 2TB cannot be configured for encryption with the -newLUN option. Fixed in Fabric OS 6.4.0a Workaround prior to upgrade: Do not configure LUNs for encryption, using the -newLUN option if the LUN size is greater than 2TB. In FICON environment, Web Tools is out of sync with CLIl; it does not Fixed in Fabric OS 6.4.0a show correct port status when FMS mode is enabled and port is moved between different logical switches from the DCFM. In Web Tools, Name server tab is unable to export name server data base from FCR-configured switch. After opening the name server tab and performing export the tables, export fails with an error message For Input String N/A. Fixed in Fabric OS 6.4.0a HP StorageWorks Fabric OS 6.4.1 Release Notes 69