HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 114
HP-UX configuration, Requirements
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Figure 30 Single path HBA server with OpenVMS or Tru64 UNIX 1 Network interconnection 2 Single HBA server 3 Dual HBA server 4 Management server 5 SAN switch 1 6 SAN switch 2 7 Fabric zone 8 Controller A 9 Controller B HP-UX configuration Requirements • Proper switch zoning must be used to ensure each single path HBA has an exclusive path to its LUNs. • Single path HBA server can be in the same fabric as servers with multiple HBAs. • Single path HBA server cannot share LUNs with any other HBAs. • In the use of snapshots and snapclones, the source virtual disk and all associated snapshots and snapclones must be presented to the single path hosts that are zoned with the same controller. In the case of snapclones, after the cloning process has completed and the clone becomes an ordinary virtual disk, you may present that virtual disk as you would any other ordinary virtual disk. HBA configuration • Host 1 is a single path HBA host. • Host 2 is a multiple HBA host with multi-pathing software. See Figure 31 (page 115). 114 Single Path Implementation