HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 50
Testing connections to the EVA, Adding hosts, Creating and presenting virtual disks
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Testing connections to the EVA After installing the FCAs, you can create and test connections between the host server and the EVA. For all operating systems, you must: • Add hosts • Create and present virtual disks • Verify virtual disks from the hosts The following sections provide information that applies to all operating systems. For OS-specific details, see the applicable operating system section. Adding hosts To add hosts using HP P6000 Command View: 1. Retrieve and note the worldwide names (WWNs) for each FCA on your host. You need this information to select the host FCAs in HP P6000 Command View. 2. Use HP P6000 Command View to add the host and each FCA installed in the host system. NOTE: To add hosts using HP P6000 Command View, you must add each FCA installed in the host. Select Add Host to add the first adapter. To add subsequent adapters, select Add Port. Ensure that you add a port for each active FCA. 3. Select the applicable operating system for the host mode. Table 16 Select the host mode for the applicable operating system Operating System HP-UX IBM AIX Linux Mac OS X OpenVMS Oracle Solaris VMware Windows Citrix Xen Server Host mode selection HP-UX IBM AIX Linux Linux OVMS Sun Solaris VMware Microsoft Windows Microsoft Windows 2008 Linux 4. Check the Host folder in the navigation pane of HP P6000 Command View to verify that the host FCAs are added. NOTE: More information about HP P6000 Command View is available at the following website: http://www.hp.com/support/manuals. Click Storage Software under Storage, and then select HP P6000 Command View software under Storage Device Management Software. Creating and presenting virtual disks To create and present virtual disks to the host server: 50 Configuring application servers