HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 36
Managing unused ports, Changing the host port connectivity, Table 10 Maximum LUN size
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Table 10 Maximum LUN size (continued) Operating system HP-UX 11.11 HP-UX 11.23 HP-UX 11.31 IBM AIX 5.2 IBM AIX 5.3 IBM AIX 6.1 Mac OS X 10.x Mac OS X 11.x Microsoft Windows Server 2003 Microsoft Windows Server 2008 Red Hat Linux 3, 4, and 5 SUSE Linux Enterprise Server 8, 9, and 10 Sun Solaris 8, 9, and 10 VMware ESX 3.0.x and 3.5 Citrix Xen Maximum LUN size 2 TB 2 TB 16 ZB 1 TB (AIX 5.2ML06 or earlier) 2 ZB (AIX 5.2ML07 or later) 1 TB (AIX 5.3ML02 or earlier) 2 ZB (AIX 5.3ML03 or later) 2 ZB Less than 32 TB Less than 32 TB 256 TB 256 TB Maximum supported block device at 16 TB as of RH5.1 Maximum block device size is 16 TB for 32-bit system and 8 iEB for 64-bit systems 2 TB 2 TB Maximum supported block device at 16 TB Managing unused ports When you have unused ports on an EVA, perform the following steps: 1. Place a loopback plug on all unused ports. 2. Change the mode on unused ports from fabric to direct connect. Changing the host port connectivity To change the host port connectivity: 1. Disconnect any connected cable. NOTE: Failing to disconnect the cable prior to making the change will require a controller restart to clear the condition. 2. Use the OCP and navigate to the host port to be changed. 3. Select fabric for an FC switch connection or direct for direct attachment to an HBA. 4. Reconnect cables. 36 EVA6400/8400 operation