HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 24
Rack System/E power distribution components, Rack AC power distribution
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
NOTE: The locations of the PDUs and the PDMs are the same in all racks. Figure 19 Rack AC power distribution 1. PDM 1 3. PDM 3 5. PDU 1 7. PDM 6 9. PDM 8 2. PDM 2 4. PDM 4 6. PDM 5 8. PDM 7 10. PDU 2 Rack System/E power distribution components AC power is distributed to the Rack System/E rack through Power Distribution Units (PDU) mounted on the two vertical rails in the rear of the rack. Up to four PDUs can be mounted in the rack-two mounted on the right side of the cabinet and two mounted on the left side. Each of the PDU power cables has an AC power source specific connector. The circuit breaker-controlled PDU outputs are routed to a group of ten AC receptacles. The storage system components plug directly into the PDUs. Rack AC power distribution The power distribution configuration in a Rack System/E rack depends on the number of storage systems installed in the rack. If one storage system is installed, only two PDUs are required. If multiple storage systems are installed, four PDUs are required. 24 EVA6400/8400 hardware