HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 44
to return to the previous menu., to select the displayed menu.
View all HP 6400/8400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
The menu tree is organized into the following major menus: • System Info-displays information and configuration settings. • Fault Management-displays fault information. Information about the Fault Management menu is included in "Controller fault management" (page 103). • Shutdown Options-initiates the procedure for shutting down the system in a logical, sequential manner. Using the shutdown procedures maintains data integrity and avoids the possibility of losing or corrupting data. • System Password-create a system password to ensure that only authorized personnel can manage the storage system using HP P6000 Command View. To enter and navigate the storage system menu tree: 1. Press any push-button while the default display is in view. System Information becomes the active display. 2. Press to sequence down through the menus. Press to sequence up through the menus. Press to select the displayed menu. Press to return to the previous menu. NOTE: To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default display. Table 14 (page 44) identifies all the menu options available within the OCP display. CAUTION: Many of the configuration settings available through the OCP impact the operating characteristics of the storage system. You should not change any setting unless you understand how it will impact system operation. For more information on the OCP settings, contact your HP-authorized service representative. Table 14 Menu options within the OCP display System Information Fault Management Versions Last Fault Host Port Config (Sets Fabric or Direct Connect) Detail View Device Port Config (Enables/disables device ports) I/O Module Config (Enables/disables auto-bypass) Loop Recovery Config (Enables/disables recoveries) Unbypass Devices UUID Unique Half Debug Flags Print Flags Mastership Status (Displays controller role - master or slave) Shutdown Options Restart Power Off System Password Change Password Clear Password Uninitialize System Current Password (Set or not) 44 EVA6400/8400 operation