HP 6400/8400 HP StorageWorks 6400/8400 Enterprise Virtual Array User Guide - Page 5

Upgrading qla2x00 RPMs 55 Detecting third-party storage 55 Compiling the driver for multiple kernels 56 Uninstalling the Linux components 56 Using the source RPM...56 Verifying virtual disks from the host 57 OpenVMS...57 Updating the AlphaServer console code, Integrity Server console code, and Fibre Channel FCA firmware...57 Verifying the Fibre Channel adapter software installation 57 Console LUN ID and OS unit ID 57 Adding OpenVMS hosts...58 Scanning the bus...59 Configuring virtual disks from the OpenVMS host 60 Setting preferred paths...60 Oracle Solaris...60 Loading the operating system and software 60 Configuring FCAs with the Oracle SAN driver stack 60 Configuring Emulex FCAs with the lpfc driver 61 Configuring QLogic FCAs with the qla2300 driver 62 Fabric setup and zoning...64 Oracle StorEdge Traffic Manager (MPxIO)/Oracle Storage Multipathing 64 Configuring with Veritas Volume Manager 64 Configuring virtual disks from the host 65 Verifying virtual disks from the host 67 Labeling and partitioning the devices 67 VMware...68 Installing or upgrading VMware 68 Configuring the EVA6400/8400 with VMware host servers 68 Configuring an ESX server 69 Loading the FCA NVRAM 69 Setting the multipathing policy 69 Specifying DiskMaxLUN 70 Verifying connectivity...70 Verifying virtual disks from the host 70 Configuring raw device mapping 71 Windows...71 Verifying virtual disk access from the host 71 Setting the Pending Timeout value for large cluster configurations 71 5 Customer replaceable units 72 Customer self repair (CSR)...72 Parts only warranty service 72 Best practices for replacing hardware components 72 Component replacement videos 72 Verifying component failure 72 Identifying the spare part...72 Replaceable parts...73 Replacing the failed component 75 Replacement instructions...75 6 Support and other resources 76 Contacting HP...76 Subscription service...76 Documentation feedback...76 Related information...76 Contents 5