HP 722c (English) User's Guide - C5870-90010 - Page 43

Plain Paper

Page 43 highlights

What If THE INK NEVER DRIES OR THERE ARE CRACKS IN THE SOLID BLOCKS OF COLOR 2 Put the transparencies in your printer with the rough side down and the adhesive strip forward. (You can peel off the adhesive strip after printing.) Adhesive strip forward, tape side up • You might have printed on the wrong side of the transparency. Make sure to put it into the printer rough side down. • You might be trying to print on a transparency that wasn't meant for an inkjet printer. THE QUALITY ISN'T WHAT YOU WERE EXPECTING You might not have chosen the right paper type and print quality. Follow the steps in the procedure above, and try printing again. Rough side down 3 Slide in the green paper adjusters, just as you would for plain paper. Push the IN drawer back in and flip the OUT tray down. 4 Print the transparency. 5 Be patient. Because the printer uses more ink, lays the colors down more slowly, and allows for a longer drying time between sheets, transparencies take a while to print. AFTER PRINTING s Change the paper type in the HP print settings box back to Plain Paper or to whatever is appropriate for what you'll be printing next. s Remove any remaining transparencies from the IN drawer and replace them with plain paper or whatever you'll be using next. Handy Hints PROTECT YOUR TRANSPARENCIES If you want to make notes on your transparency as you talk, print the transparency as a flipped document (described on page 18). 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66

32
2
Put the transparencies in your printer with the rough side down and
the adhesive strip forward. (You can peel off the adhesive strip after
printing.)
3
Slide in the green paper adjusters, just as you would for plain paper.
Push the IN drawer back in and flip the OUT tray down.
4
Print the transparency.
5
Be patient.
Because the printer uses more ink, lays the colors down more slowly,
and allows for a longer drying time between sheets, transparencies
take a while to print.
Change the paper type in the HP print settings box back to
Plain Paper
or to whatever is appropriate for what you’ll be printing next.
Remove any remaining transparencies from the IN drawer and replace
them with plain paper or whatever you’ll be using next.
Adhesive strip forward, tape
side up
Rough side down
A
FTER
P
RINTING
What If
T
HE
INK
NEVER
DRIES
OR
THERE
ARE
CRACKS
IN
THE
SOLID
BLOCKS
OF
COLOR
• You might have
printed on the wrong
side of the transpar-
ency. Make sure to
put it into the printer
rough side down.
• You might be trying
to print on a trans-
parency that wasn’t
meant for an inkjet
printer.
T
HE
QUALITY
ISN
T
WHAT
YOU
WERE
EXPECTING
You might not have
chosen the right paper
type and print quality.
Follow the steps in the
procedure above, and
try printing again.
Handy Hints
P
ROTECT
YOUR
TRANSPARENCIES
If you want to make
notes on your trans-
parency as you talk,
print the transparency
as a flipped document
(described on
page 18).