HP 800ps HP Designjet 800ps Printer - User's Guide - Page 134
Printhead Replacement, Clearing a Media Jam, proper installation of setup
View all HP 800ps manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Introduction Media & Ink The Front Panel Solutions Front Panel Printer Options Other Index Menu Structure Navigating the Menu System Message Descriptions Front Panel Messages (continued) Message Explanation and Action Install missing cartridges before replacing printheads Open window and check printhead cover is properly closed Open window and check proper installation of setup printheads You are replacing printheads, but the printer has detected that one or more cartridges are missing. The missing cartridges must be installed before the printheads are replaced. Follow the procedure for Printhead Replacement. Press the Enter or Cancel key to continue. You have replaced one or more printheads and the printer's check has found that the printhead cover is not securely closed. Open the window and check the printhead cover. The procedure is described in the Printhead Replacement procedure. Note: This message may also appear following a paper jam, as the printer cannot detect the exact reason for the problem. In this case you may have to resort to powering off the printer or even removing the power cable from the machine, in order to recover from the problem. See Clearing a Media Jam. During system start-up, which occurs when you first install the printer, you need to install the setup printheads. These special printheads cannot be used for printing, but must be used when the printer has been powered off. The printer has detected that the setup printheads have not been installed correctly. Open the window and follow subsequent instructions to reinstall or relocate the setup printheads. Contact HP for advice if the setup printheads are missing or cannot be installed correctly. For more Messages, click on the Next Page button