HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 27
Removing the optical device
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Removal and Replacement Procedures To remove the optical device: 1. Press the Power On/Standby switch to place the server in standby mode. Refer to "Powering Down the Server" earlier in this chapter. 2. Push the optical device ejector button to release the optical device (1). NOTE: Access to the optical device ejector button is intentionally restricted. Push the optical device ejector button with a small flat object such as a key or pen to eject the optical drive. 3. Grasp the optical device and remove it from the optical device bay (2). Figure 2-11: Removing the optical device 2-14 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM
Removal and Replacement Procedures
To remove the optical device:
1.
Press the Power On/Standby switch to place the server in standby mode. Refer to
“Powering Down the Server” earlier in this chapter.
2.
Push the optical device ejector button to release the optical device (1).
NOTE:
Access to the optical device ejector button is intentionally restricted. Push the optical
device ejector button with a small flat object such as a key or pen to eject the optical drive.
3.
Grasp the optical device and remove it from the optical device bay (2).
Figure 2-11: Removing the optical device
2-14
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM