HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 43
SCSI Backplane Board, Device/Diskette Drive Interface Board earlier in
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Removal and Replacement Procedures SCSI Backplane Board To remove the SCSI backplane board: 1. Power down the server. Refer to "Powering Down the Server" earlier in this chapter. 2. Remove the server from the rack. Refer to "Removing the Server from the Rack" earlier in this chapter. 3. Remove the access panel. Refer to "Server Access Panel" earlier in this chapter. 4. Remove the optical device/diskette drive interface board. Refer to "Optical Device/Diskette Drive Interface Board" earlier in this chapter. 5. Lift the SCSI backplane board until it clears the server. Figure 2-34: Removing the SCSI backplane Reverse steps 1 through 5 to replace the SCSI backplane. 2-30 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM