HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 57

Re-entering the Server Serial Number, System Options, Serial Number, Enter, Escape

Get HP DL360 - ProLiant - G3 PDF manuals and user guides
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

Removal and Replacement Procedures IMPORTANT: The server serial number must be re-entered through RBSU after replacing the system board. Refer to the "Re-entering the Server Serial Number" section. Re-entering the Server Serial Number After replacing the server I/O module or clearing the NVRAM, the server serial number must be re-entered. To re-enter the serial number: 1. During the server startup sequence, press the F9 key to access RBSU. 2. Select the System Options menu. 3. Select Serial Number. The following warning is displayed: WARNING! WARNING! WARNING! The serial number is loaded into the system during the manufacturing process and should NOT be modified. This option should ONLY be used by qualified service personnel. This value should always match the serial number sticker located on the chassis. Press the Enter key to clear the warning. 4. Enter the serial number and press the Enter key. 5. Press the Escape key to close the menu. 6. Press the Escape key to exit RBSU. 7. Press the F10 key to confirm exiting RBSU. The server will automatically reboot. 2-44 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
Removal and Replacement Procedures
2-44
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM
IMPORTANT:
The server serial number must be re-entered through RBSU after replacing the system
board. Refer to the “Re-entering the Server Serial Number” section.
Re-entering the Server Serial Number
After replacing the server I/O module or clearing the NVRAM, the server serial number must
be re-entered. To re-enter the serial number:
1.
During the server startup sequence, press the
F9
key to access RBSU.
2. Select the
System Options
menu.
3. Select
Serial Number
. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded into the
system during the manufacturing process and should NOT be
modified. This option should ONLY be used by qualified service
personnel. This value should always match the serial number
sticker located on the chassis.
Press the
Enter
key to clear the warning.
4.
Enter the serial number and press the
Enter
key.
5. Press the
Escape
key to close the menu.
6. Press the
Escape
key to exit RBSU.
7. Press the
F10
key to confirm exiting RBSU. The server will automatically reboot.