HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 50

Installing and locking a processor in the socket

Page 50 highlights

To replace the processor: 1. Install the processor into the socket (1). 2. Close the processor locking lever (2). Removal and Replacement Procedures Figure 2-41: Installing and locking a processor in the socket CAUTION: Heatsinks have an integrated, plastic-covered thermal pad. Remove the plastic cover from the new heatsink to expose the adhesive side of the thermal pad before placing the heatsink on the processor. 3. Remove the protective covering from the heatsink. Figure 2-42: Removing the heatsink protective covering HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM 2-37

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77

Removal and Replacement Procedures
To replace the processor:
1.
Install the processor into the socket (1).
2.
Close the processor locking lever (2).
Figure 2-41: Installing and locking a processor in the socket
CAUTION:
Heatsinks have an integrated, plastic-covered thermal pad. Remove the plastic
cover from the new heatsink to expose the adhesive side of the thermal pad before placing
the heatsink on the processor.
3.
Remove the protective covering from the heatsink.
Figure 2-42: Removing the heatsink protective covering
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
2-37
HP CONFIDENTIAL
Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM