HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 29
Removing optical device ejector screws
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Removal and Replacement Procedures 5. Remove the screws securing the optical device ejector to the chassis. Figure 2-13: Removing optical device ejector screws 6. Press the tab on the side of the optical device ejector (1) to release it from the chassis. NOTE: Access to the tab on the side of the optical device ejector is restricted. To push in the tab on the optical device ejector, use a small flat object such as a key, screwdriver, or pen. 7. Lower the optical device ejector and remove it from the chassis (2). Figure 2-14: Removing the optical device ejector from the chassis 2-16 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM
Removal and Replacement Procedures
5.
Remove the screws securing the optical device ejector to the chassis.
Figure 2-13: Removing optical device ejector screws
6.
Press the tab on the side of the optical device ejector (1) to release it from the chassis.
NOTE:
Access to the tab on the side of the optical device ejector is restricted. To push in the tab
on the optical device ejector, use a small flat object such as a key, screwdriver, or pen.
7.
Lower the optical device ejector and remove it from the chassis (2).
Figure 2-14: Removing the optical device ejector from the chassis
2-16
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM