HP DL360 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 34
If you are replacing the power supply from hot-plug power supply bay 1, and there is
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Removal and Replacement Procedures To install a hot-plug power supply: 1. Remove the protective cover from the connector on the power supply. 2. Slide the power supply into the chassis until it snaps into place. Figure 2-21: Installing a power supply (cables removed for clarity) 3. If you are replacing the power supply from hot-plug power supply bay 1, and there is a sliding rail solution in place: a. Push the cable retractor toward the rack rail and toward the chassis (1). b. Tighten the cable retractor thumbscrew (2). Figure 2-22: Returning the cable retractor (cables removed for clarity) HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: M-ERTL Part Number: 293948-003 Last Saved On: 9/18/03 9:30 AM 2-21