HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 12
Removal and Replacement Procedures, Electrostatic Discharge Information
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2 Removal and Replacement Procedures This chapter provides subassembly/module-level removal and replacement procedures for the HP ProLiant DL360 Generation 3 server. After completing all necessary removal and replacement procedures, it is recommended that server diagnostic programs be run to verify that all components are operating correctly. The following diagnostic programs, from the SmartStart and Support Software CD, may be used: • System Configuration Utility • Array Diagnostic Utility (ADU) In addition, the Server Diagnostics program may be run. This program is available at www.hp.com/support. Electrostatic Discharge Information A discharge of static electricity can damage static-sensitive devices or micro circuitry. Proper packaging and grounding techniques are necessary to prevent damage. To prevent electrostatic damage, observe the following precautions: • Transport products in static-safe containers such as conductive tubes, bags, or boxes. • Keep electrostatic-sensitive parts in their containers until they arrive at static-free stations. • Cover workstations with approved static-dissipating material. Use a wrist strap connected to the work surface and properly grounded tools and equipment. • Keep the work area free of nonconductive materials such as ordinary plastic assembly aids and foam packing. • Always be properly grounded when touching a static-sensitive component or assembly. • Avoid touching pins, leads, or circuitry. • Always place drives PCB assembly-side down. • Use conductive field service tools. HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 2-1 HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM