HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 37

PCI Riser Board Assembly earlier in

Get HP DL360 - ProLiant - G3 PDF manuals and user guides
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Removal and Replacement Procedures 4. If the server is configured with hot-plug power supplies: a. Remove both hot-plug power supplies. Refer to "Hot-Plug Power Supplies" earlier in this chapter. b. Press down on the tab on the power supply fan baffle (1). c. Slide the baffle toward the back of the chassis, and remove it (2). Figure 2-28: Removing the power supply fan baffle 5. If the server is configured with a PCI riser board assembly in PCI expansion board slot 2: a. Remove the hot-plug power supply. Refer to "Hot-Plug Power Supplies" earlier in this chapter. b. Remove the PCI riser board assembly from PCI expansion board slot 2. Refer to "PCI Riser Board Assembly" earlier in this chapter. 2-26 HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
Removal and Replacement Procedures
4.
If the server is configured with hot-plug power supplies:
a.
Remove both hot-plug power supplies. Refer to “Hot-Plug Power Supplies” earlier in
this chapter.
b.
Press down on the tab on the power supply fan baffle (1).
c.
Slide the baffle toward the back of the chassis, and remove it (2).
Figure 2-28: Removing the power supply fan baffle
5.
If the server is configured with a PCI riser board assembly in PCI expansion board slot 2:
a.
Remove the hot-plug power supply. Refer to “Hot-Plug Power Supplies” earlier in
this chapter.
b.
Remove the PCI riser board assembly from PCI expansion board slot 2. Refer to
“PCI Riser Board Assembly” earlier in this chapter.
2-26
HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide
HP CONFIDENTIAL
Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM