HP DL360 ProLiant DL360 Generation 3 Server Maintenance and Service Guide - Page 40
Loosen the thumbscrews securing the interface board to the server chassis 2.
UPC - 613326948835
View all HP DL360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Removal and Replacement Procedures 5. Disconnect the I/O system fan assembly power cables (1) and the optical device/diskette drive interface board power cable (2). Figure 2-32: Disconnecting I/O system fan assembly and power converter module power cables 6. Disconnect the optical device/diskette drive cable (1). 7. Loosen the thumbscrews securing the interface board to the server chassis (2). 8. Pull the interface board forward, tip it, and remove it from the server chassis (3). Figure 2-33: Removing the optical device/diskette drive interface board from the chassis Reverse steps 1 through 8 to replace the optical device/diskette interface board. HP ProLiant DL360 Generation 3 Server Maintenance and Service Guide 2-29 HP CONFIDENTIAL Codename: Introv-ERTL Part Number: 293948-005 Last Saved On: 2/27/04 2:49 PM